Setting Up a World Writable FreeNAS Share

This really shouldn't have been that hard, but it was. Just so I don't forget in the future, here it is:

First in FreeNAS, create the share:

Then give it every permission in the book:

Now, on my Raspberry Pi:

cat thomas@raspberrypi ~ $ cat /etc/fstab
proc            /proc           proc    defaults          0       0
/dev/mmcblk0p1  /boot           vfat    defaults          0       2
/dev/mmcblk0p2  /               ext4    defaults,noatime  0       1
# a swapfile is not a swap partition, so no using swapon|off from here on, use  dphys-swapfile swap[on|off]  for that

//  /mnt/share cifs guest,rw,iocharset=utf8,nounix,noserverino,file_mode=0777,dirmode=0777